Products
Products
- View as
Underground Mining Expansion Shell Anchor
Underground Mining Expansion Shell Anchor, Anchor bolt, in tunneling and underground mining, steel rod inserted in a hole drilled into the roof or walls of a rock formation to provide support to the roof or sides of the cavity. Rock bolt reinforcement can be used in any excavation geometry, is simple and quick to apply, and is relatively inexpensive. The installation can befully mechanized.The length of the bolts and their spacing can be varied, depending on the reinforcement requirements.
View DetailsSend Inquiry
Underground Expansion Shell
The Underground expansion shell holds in any rock strata which is sufficiently competent to provide an adequate anchorage. They are designed to anchor in soft ground or hard rock. In good strata, the anchorage exceeds the ultimate strength of the steel bolt. All expansion shells require a competent strata in the anchor zone.
View DetailsSend Inquiry
Roof Supporting Expansion Shell Bolts
Roof Supporting Expansion Shell Bolts are used for fixing single-sided shuttering or similar structures in rock, concrete or comparable load-bearing ground. When installing expansion shells, please consult the separate installations instructions available on demand.
View DetailsSend Inquiry
Mining Expansion Shell Anchor Bolt
As the professional manufacture, we would like to provide you Mining Expansion Shell Anchor Bolt. Rock bolt, in tunneling and underground mining, steel rod inserted in a hole drilled into the roof or walls of a rock formation to provide support to the roof or sides of the cavity. Rock bolt reinforcement can be used in any excavation geometry, is simple and quick to apply, and is relatively inexpensive. The installation can be fully mechanized. The length of the bolts and their spacing can be varied, depending on the reinforcement requirements.
View DetailsSend Inquiry
Mining and Tunneling Expansion Shell Anchor
Mining and Tunneling Expansion Shell Anchor geometry showing the internal and external forces Eq. (1) indicates that the friction angle for the interface between the cone and the inner leaf surface must be less than the friction angle for the interface between the outer shell and the rock by an amount greater than the taper angle of the cone and inner leaf interface. In many cases, this condition is unlikely to be achieved because anchors are manufactured from cast components with an inherent roughness; the friction angle associated with this less than smooth surface is then often increased following zinc coating.
View DetailsSend Inquiry
Expansion Shell Bolt
You can rest assured to buy Expansion Shell Bolt from our factory and we will offer you the best after-sale service and timely delivery. Expansion shells bolt is used for fixing single-sided shuttering or similar structures in rock, concrete or comparable load-bearing ground.
View DetailsSend Inquiry
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy